HCI RM22A - Advanced Setup: Lock and Control Features; Keypad Lock and OSD Timer; Parental Control Configuration; Input Source and Device Settings

------------------------------------------------- ------------------------- - RM22A/RM22D OPERATIONS MANUAL
HealthCare Information, LLC 19
K eypad Disables the front panel keypad on models equipped with keypad. Selections are:
L ock
O ff – L ock 1 – L ock 2
O ff Keypad fu nctions normally.
L ock 1 Only POWER button functions.
L ock 2 CH+ , CH - , VOL+ , VOL - and POWER button function.
OSD T imer Determines how long in seconds the on screen display stay on the screen. Selections are.
10 – 20 – 30 – 40 - 50 – 60 – Alway s
If “ A lways” is selected. The display will remain on the screen until the "ENTER" button is
pressed on the IR remote.
Restore Resets all settings to factory default.
Default
L ock M enu
P arental Sets the password for parental control. To access en ter the proper password. Default
Control password is “9999”. See pages 27 -28 for ratings explanation. Selections are:
C hange P assword - System Lock - US - C anada - RRT S etting - R eset RRT .
C hange Change parental control password.
Password
S ystem Tu rns parental control on or off. Must be on to set ratings
L ock
US Settings for US ratings.
C anada Settings for Canadian ratings.
RRT Rating Region Tabl e – set according to your region and requirements.
Setting
R eset RRT Resets the RRT.
OP Change t he password used to access the setup menus . D efault password is "9999"
P assword
I nput Locks the various inputs so they can not be selected. Highlight the source and press
Source the “ENTER” button to lock or unlock. Locked sources will not appear in the source
selection menu.
D evice Sets the TV for Pillow Speaker or Sip & Puff functions
K eypad Changes the functions of the f ront panel buttons. See Page 29.
D efine
I nput When on, the TV will return to the previous input source if there is no video or the
A uto - Det video is lost for the selected input.
Serial Control When on allows TV to be controlled via an RS - 232 device through the serial port.
I nformation Display s current information about input source and software version.