www.goldfitness.com.au.
3
ASSEMBLY STEP 4:
ASSEMBLY STEP 5:
ASSEMBLY STEP 6:
Slide right upright (4) onto MAIN
FRAME (1)
To attach the upright posts (4) to the
frame use bolt (41) and lock washer (60)
using the 5# Allen wrench
Note: Support the right upright with your
hand to avoid injury.
ATTENTION: complete the assembly as pictured above and tighten all bolts.
Before you use the treadmill read the instructions carefully.
Take bolt (41) and Lock washer (60) and
insert them into R&L upright (3,4). Using
the 5# Allen wrench
Then lock the COMPUTER (64)
Insert the UPRIGHT COVER (22) onto
the L&R handle bar (5)
To Next Page
Loading...
