www.goldfitness.com.au.
6
OPERATION GUIDE
WINDOW DISPLAY:
1、“INCL/PULSE”window: This will display the user’s incline level and user’s pulse; the incline range is
from 0 to 12%. The default setting will start at 0%. When the user places both hands over the palm
pulse, it can track and display the user’s pulse after 5 seconds, the LED will indicate the pulse
function. The pulse range will be from 40-200 b/pm.
2. “TIME/ DIST/CAL”,”TIME’’ window will alternate every five seconds; this is indicated via the LED. The
time is measured in minutes and seconds. During a Pre Set program the window will show a count
down phase, in the default manual setting the time will count on. “DIST’” window is measured in
kilometers. The default setting will start at 1km/h. ‘’CAL’’, in the default manual setting and also during
the Pre Set programs you will have a calorie count available. This will automatically count upward for
the duration of use.
3、“SPEED” window: Display speed, show range: 1.0-16 KM/h.
BUTTON FUNCTION:
1、“PROGRAM” Button：When the treadmill is not running, press the SELECT button and choose the
To Next Page
