Healy Wellness - 1 General; 2 Healy; Intended Use; Warnings

68 | EN
Healy GmbH | Schloss Kränzlin | Darritzer Str. 6 | 16818 Kränzlin – Germany
1. General
Thank you for choosing Healy. Please read this manual carefully
and pay special attention to the warnings and cautions.
This manual is intended for the user. Intended users include
adults at home. It aims to ensure safe handling and enables
users to become familiar with the device.
2. Healy
2.1 Intended Use
Healy is a microcurrent device that uses specic frequencies to
promote energetic balancing. It can be applied to dierent parts
of the body.
2.2 Warnings
• Not for use by pregnant women
• Not for use by those with epilepsy
• Do not place the electrodes directly on the eyes, covering the
mouth, on the front of the neck (especially the carotid sinus), or
on the chest and the upper back or crossing through the heart.
2.3 Description
The Healy is a portable device, internally powered and
controlled via Bluetooth by a software application that is ins-
talled on a Smartphone. It has one output. The output can be va-
ried between -10V and +10 V, 0 to 1 MHz, 0 – 4 mA.
The charging of the internal battery is done through the Micro-
USB-Port and the supplied power supply cable.
The software application “Healy APP“ is necessar y for congura-
tion and control of the Healy. The “Healy App“ is available in the
Play Store or the App Store. Before installation verify the smart-
phone requirements in section 4.1.1.
2.3.1 Hardware Description
Figure 2 . 3.1.1: Healy top view:
Pos. 1 Icon and LED for Blue-
tooth Connec tion; Pos. 2 On-
O Button; Pos. 3 Battery
icon, Pos. 4 LED for genera-
tor action (if stimulator out-
put is active, then the LED is
blinking) and battery indica-
tor; Pos. 5 Generator icon;
Pos. 6 Icons for the positive
and negative electrode plugs;
Pos. 7 USB-Connector icon;
Pos. 8 Socket for power supply
through micro-USB–connector (not visible in this gure); Pos. 9
Sockets for the electrodes (not visible in this gure)
2.3.2 Software Description
The “Healy APP“ is required for conguring and controlling the
hardware. It allows sending application programs to the device.