EN | 69
T. +49 30 54905949-1 | www.healy.eu | info@healy.de
With the App you can start and
stop the application. The “Hea-
ly APP“ connects to your Healy
hardware using Bluetooth. The
“Healy APP“ can connect only to
one device at a time.
Figure 2.3.2.1: Overview in-
terface of the Healy APP. Pos.
1-Icon for the signal quality of
the Bluetooth connection to the
Healy; Pos. 2-Icon for the batte-
ry status of the Healy
2.4 General
• Intentional misuse can be har-
mful or reduce the eective-
ness of the device.
• Carefully read the instructions
for use before use.
• This product is intended only
for the purpose described in
these ins tructions for use.
• In this manual, the word DANGER warns of possible personal
injury!
• In this manual, the word WARNING warns of possible damage
caused to property!
2.5 Safety Notes
Danger/Warning:
• Keep this device out of the reach of children.
• Do not immerse the device in liquids.
• Do not use while driving motor vehicles or operating heavy
machinery. The ability to drive or to operate heavy machinery
may be impaired immediately after application.
• Only charge with the supplied cable from an USB-Socket with
5V dc and max 2500 mA.
• In the case of a defect please contact the manufacturer. Any
attempt to repair the device will void the warranty.
• Use with care as the cables may cause a tripping or strangu-
lation hazard.
• Don’t use in presence of ammable gases or in an oxygen en-
riched environment.
• Stop application and remove the electrodes if any irritation,
sensation, allergic reaction or burning occurs at the electrode
contact points and contact us. Pay attention when using the
device and currents higher than 2mA (ear-clip electrodes) or 4
mA (surface electrodes).
• Take care that the units output connectors are always pointed
towards the oor. This way the device is protected against da-
mage by water or liquids.
• The device should only be stored and transported under the
conditions dened in these instructions.
Figure 2.3.2.1
To Next Page
Loading...
