72 | EN
Healy GmbH | Schloss Kränzlin | Darritzer Str. 6 | 16818 Kränzlin – Germany
Within 20 seconds the App scans the environment and connects
to the Healy automati cally. If your smartphone detects a Healy
gure 3.1.5.3 appears.
After you scan the QR-Code on the back of the Healy or enter the
serial number of the device you can connect to the Healy by pres-
sing the “Connect” button (see gure 3.1.5.4).
3.1.6 Connection of the electrodes
The electrodes have been tested and evaluated together with
the Healy and are safe and eective for use, if the recommenda-
tions and advice in this manual are followed. Check the package
containing the electrodes and make sure the gel is intact; if the
package is visibly dented or damaged, do not use the product.
Put the plugs of the electrode cables into the sockets of the Hea-
ly. Place the electrodes onto the desired area.
Important note on using the adhesive electrodes:
• Never place electrodes in the region of the carotid artery
• Do not place the electrodes on open wounds
• Before use clean the application area and if necessary shave
the area
• Choose an area free from hair, skin lesions or scars, folds in the
skin, or bony protuberances and which is not in the vicinity of
metallic implants.
• Clean and dry the application area before placing the elec-
trode on it
• Avoid the use of solvents as these could cause skin irritation
and reduce the adherence of electrodes.
• If using alcohol to clean the area, make sure that it has comple-
tely dried before applying the electrodes.
Figure 3.1.5.3: Scan serial
number screen
Figure 3.1.5.4: Connect screen
To Next Page
Loading...
