Heath Zenith Secure Home SH-4192-BK-A User Manual

DualBrite
®
Motion
Sensing Diecast
Lantern
© 2012 HeathCo LLC 200477-02A
Set the ON-TIME switch
on the bottom of the cover
plate to TEST.
MANUAL MODE
... back on.
1 Second
OFF then...
OPERATION
* resets to Auto Mode at dawn.
TEST
TEST 1 5 10 MIN
AUTO
TEST 1 5 10 MIN
Set ON-TIME switch to
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
Mode: On-Time Works: Day Night
Test
5 Seconds x x
Auto
1, 5, or 10 Min x
Manual
To Dawn* x
Accent
3, 6 Hr, to Dawn x
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
Before installation, record the model number
from back of fixture below. Attach receipt in
case of possible warranty issues.
Items Models
066799 SH-4192-BK-A
067208 SH-4192-WH4-A
Questions or problems? Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 8:00 am to 5:00 pm, CST,
Monday – Friday.
Features
• Lightcomesonwhenmotionisdetected.
• Automaticallyturnslightoff.
• DuskAccentlighting.
• Photocellkeepsthelightoffduringdaylight
hours.
Package Contents
• Lantern
• EasytouseUniversalMountingBracket
(X-bar)
• MountingHardware
• WireConnectors
ON-TIME
ON-TIME
Requirements
• Thelightcontrolrequires120voltsAC.
• IfyouwanttouseManualMode,thecontrol
must be wired through a switch.
• Some electrical codes require installa-
tion by a qualified electrician.

Heath Zenith Secure Home SH-4192-BK-A Specifications

General

Brand	Heath Zenith
Model	Secure Home SH-4192-BK-A
Category	Home Safety Product
Language	English