Heathkit HD-10 - Transistor Installation

PICTORIAL 7
TRANSISTOR INSTA LLA TlON
Refer to Pictorial 7 for the following steps.
Carefully turn the circuit board over and posi-
tion
it as shown.
I
('d Referring to Detail 7A, install 2N407 tran-
sistors in sockets
Q1, Q2, Q4, 95, Q7, Q9,
and QiO. Support the circuit board from the
foil side as you install the transistors.
This will prevent damage to the board.
Detail 7A