Heatilator CONSTITUTION C-40 - Tools and Supplies Needed; Inspect Fireplace and Components

November 11, 2008
Heatilator • Constitution EPA Fireplace • 480-1091C
Page 9
Before beginning the installation be sure the following tools
andbuildingsuppliesareavailable:
Reciprocating saw Framing material
Pliers High temp caulking material
Hammer Gloves
Phillips screwdriver Framing square
Flat blade screwdriver Electric drill and bits
Plumb line Safety glasses
Level Tape measure
1/2-3/4in.length,#6or#8self-drillingscrews
Misc.screwsandnails
• Keepreplacedry.
• Moldorrustmaycauseodors.
CAUTION
E. Inspect Fireplace and Components
• Carefullyremovethereplaceandcomponentsfromthe
packaging.
• Doorsareshippedonthereplace.
• Report to your dealer any parts damaged in shipment.
Fire Risk
Explosion Risk
Inspect fireplace and components for
damage. Damaged parts may impair safe
operation.
• DoNOTinstalldamagedcomponents.
• DoNOTinstallincompletecomponents.
• DoNOTinstallsubstitutecomponents
Report damaged parts to dealer.
WARNING
D. Tools and Supplies Needed
Fire Risk.
WARNING
• Do not operate appliance before reading and
understanding operating instructions.
• Failure to operate appliance properly may
causeahousere.