2.Terminology
Set Temperature
This is the temperature the thermostat is currently
controlling to. At any time, you can press the
Up/Down arrow key and the display will show the
Set Temperature for 30 seconds.
R
T (Room Temperature)
This is the actual room temperature.
Fr
ost Protection ( By pressing “H”)
To protect the fabric of the building, the
thermostat has a “frost protection” facility. Should
the temperature drop below this temperature the
heating will be switched on. On certain models
the frost protection temperature is adjustable.
Temperature Calibrating
When the thermostat is first installed it requires
calibrating. This means taking an accurate
reading from a thermometer and then adjusting
the thermostat to compensate for any difference.
This only needs to be done once and it is
recommended that it is done after the thermostat
has been operating for 1 hour.
Clock
The programmable models in the range have a
built in clock. This is displayed in 24 hr format.
Fr
ost Protection (Thermostat Off)
The thermostat can be made to offer frost
protection even when the thermostat is turned off
by the On/Off button. In order for this to work, this
function must be enabled.
6
5
To Next Page
Loading...
