Need help?Do you have a question about the Heatmiser Wireless Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Control | Wireless |
| Power Source | Battery |
| Wireless Range | Up to 30m |
| Temperature Range | 5°C |
| Programming | 7-day programmable |
Covers recommended placement and things to avoid for proper installation.
Step-by-step instructions for physically mounting the thermostat unit.
Explains how to access the battery holder and general battery usage.
Details the correct orientation and securing of batteries in the holder.
How to replace batteries and retain settings, including the battery icon indicator.
Identifies compatible receivers and how to select the correct type for system setup.
Explains pairing features (P1, P2, P3) and the initial steps for entering pairing mode.
Detailed instructions for pairing the thermostat with the UH8-RF V2 wiring centre.
Guide to pairing with UH8-RF, including setting rotary switches and zone configuration.
Instructions for pairing the thermostat with the RF-Switch V2.
Steps to pair the thermostat with the RF-Switch device.
Instructions for pairing the thermostat with the RF-Switch 16 Amp.
Explains all indicators and features shown on the thermostat's LCD screen.
Step-by-step guide to setting the thermostat's clock and day.
Explains how the thermostat displays current room temperature versus the target set temperature.
Details Weekday/Weekend and 7 Day programming, including default comfort levels.
Step-by-step guide to setting specific comfort levels (Wake, Leave, Return, Sleep).
Instructions for setting the start and end times for hot water control.
How to lock and unlock the thermostat keypad to prevent unauthorized changes.
How to temporarily adjust the target temperature using the Up/Down keys.
How to set a temporary temperature hold with a specific duration and target temperature.
Instructions for setting a holiday period to maintain a frost protection temperature.
How to manually turn hot water ON or OFF, overriding the programmed schedule.
Explains how to activate, set, and cancel Frost Protect mode.
How to interpret heating status and turn the thermostat completely on or off.
Steps to recalibrate the thermostat for accurate temperature readings.
Instructions to restore the thermostat to its original factory settings.
Explains features for temperature units and switching differential.
Describes Frost Protect settings and Output Delay functionality.
Covers Up/Down limit settings and Air Sensor selection.
Explains Optimum Start and Rate of Change features.
Details Program Mode and Thermostat Mode options.
Step-by-step guide to navigate and change optional feature settings.
To Next Page
