Need help?Do you have a question about the Heatmiser Slimline-E V3 and is the answer not in the manual?
General| Model | Slimline-E V3 |
|---|---|
| Display | LCD |
| Wi-Fi Connectivity | No |
| Compatibility | Electric Underfloor Heating |
| Power Supply | 230V AC |
| Switching Capacity | 16A |
| Accuracy | ±0.5°C |
| Control Output | Relay |
| Certification | CE |
| Floor Sensor | 10kΩ NTC |
| Type | Electronic Programmable Thermostat |
| Temperature Range | 5°C to 35°C |
Covers installation warnings, mounting steps, and basic setup procedures.
Explains switching between thermostat and time clock modes and performing a factory reset.
Details display indicators and steps for setting the thermostat's clock.
Details programming modes and comfort level settings for weekdays and weekends.
Instructions for temporary temperature override and setting holiday periods.
Explains how to enable frost protection and control the heating system's power state.
Explains optional features like temperature format, differential, and sensor selection.
Covers calibration, error codes, and a comprehensive table of optional features.
Details time clock indicators, clock setting, and keypad lock functions.
Covers setting switching times, countdown mode, timer override, and holiday settings.
Explains time clock modes and provides a feature reference table for adjustments.
A diagram illustrating the electrical connections for the Slimline-E thermostat.
Provides support contact details, website, and social media links for more information.
To Next Page
