Need help?Do you have a question about the Heatmiser Touch and is the answer not in the manual?
General| Control | Touch Screen |
|---|---|
| Type | Programmable Thermostat |
| Display | LCD |
| Mounting | Wall-mounted |
| Certification | CE |
Displays the day of the week.
Displayed when the thermostat is in Holiday mode.
Displayed when the thermostat is in Hold mode.
Displays time in normal operation, time left in hold or days left in holiday mode.
Increase or decrease values shown on top digit group.
Displayed when the thermostat is calling for heat.
Displayed when the keypad is locked.
Enables/disables frost protection or turns off display.
Displayed when the thermostat is in frost protection mode.
Indicates current temperature sensor mode.
Indicates when changes are being made to programs.
Freezes screen temporarily for cleaning.
Increase or decrease values shown on bottom digit group.
Used to exit setup/program operations.
Used to navigate setup options.
Indicates the current sensor temperature.
Shows temperature in Degrees Celsius or Fahrenheit.
Used in comfort level setup.
Allows selection between °C or °F.
Adjusts the thermostat's switching differential.
Sets whether frost temperature is maintained when display is off.
Temperature maintained in frost mode (07-17°C).
Prevents rapid switching by setting an output delay (00-15 mins).
Not used on this model.
Limits the use of up and down keys.
Selects between built-in or remote air sensor.
Not adjustable on this model.
Delays heating start-up to ensure warmth at programmed time.
Learns home heat-up time to optimize heating efficiency.
Selects between Non-Programmable, 5/2 Day, or 7 Day programming.
To Next Page
