20
Feature 08 – Air Sensor Selection: On this thermostat, you can select which sensor
should be used. Built in sensor or remote air sensor.
Feature 09 – Floor Limit Sensor: This function is not adjustable on this model.
Feature 10 – Optimum Start: Optimum start will delay the start up of the heating
system to the latest possible moment to avoid unnecessary heating and ensure
the building is warm at the programmed time. The thermostat uses the rate of
change information to calculate how long the heating needs to raise the building
temperature 1°C (with a rate of change of 20, the thermostat has calculated the
heating needs 20 minutes to raise the building temperature 1°C) and starts the
heating accordingly.
Feature 11 – Rate Of Change: This is the number of minutes the thermostat has
calculated it takes to raise your building temperature 1°C. The thermostat will
continue to monitor and learn the heat up time of your home to optimise heating
efficiency.
Feature 12 – Programming Mode: The following program modes are available;
Non-Programmable – Basic up/down override temperature control.
5/2 Day Programming – 4 levels for the weekdays and 4 different levels for
the weekend.
7 Day Programming – 4 levels for each day.
Model: Touch
To Next Page
Loading...
