Need help?Do you have a question about the Heatmiser PRT-TS and is the answer not in the manual?
General| Type | Programmable Room Thermostat |
|---|---|
| Display | LCD |
| Connectivity | Wired |
| Power Supply | 230V AC |
| Frost Protection | Yes |
| Accuracy | ±0.5°C |
| Programmable | Yes |
| Temperature Range | 5°C to 35°C |
| Switching Current | 3A (resistive) |
| Number of Programs | 7 |
| Weight | 150g |
| Mounting | Wall-mounted |
Carefully separate the front half of the thermostat from the back plate using a terminal driver.
Place the thermostat front safely and terminate as shown in the diagrams.
Screw the thermostat back plate securely into the back box.
Clip the front of the thermostat back onto the thermostat back plate.
Use keys to set the hours, minutes, and day of the week for the clock.
Press DONE to save the clock settings and exit.
Manually override program by setting a different temperature for a desired period.
Reduce the hold time to 00:00 to cancel the active temperature hold.
Press and hold the OFF key to turn the thermostat OFF.
Press and hold OFF to turn off, then hold bottom left of LCD for 10 seconds.
All icons appear briefly; press ON to turn the thermostat back on.
To Next Page
