Heatmiser Slimline-E V3 - Re-Calibrating the Thermostat

Re-calibrating the Thermostat
If you need to re-calibrate the thermostat, follow these steps.
• Press and hold the Power button to turn the thermostat OFF ............................
• Press and hold BOTH the Power and Down keys together until the
temperature appears on the screen ........................................................................
• Use the Up/Down keys to congure the new temperature ..........................
• Press A to conrm settings ..............................................................................................
• Press the Power button once to turn the thermostat back ON ..........................
Calibration Temperature Setting
Set Icon
25
Slimline Series