Heatmiser Slimline-E V3 - Time Clock Programming and Modes

Setting the Switching Times
To program the switching times, follow these steps.
• Press the Clock button once ...................................................................................................
• You will see Mon (7 day mode), Mon - Fri (5/2 day mode) or Mon -Sun (24H mode)
displayed on screen. Use the Up/Down buttons to select the TIMER ON
for the WAKE switching period ....................................................................................
• Press H to conrm settings ......................................................................................................
• Use the Up/Down buttons to select the TIMER OFF for the WAKE
switching period ...............................................................................................................
• Press H to conrm settings ......................................................................................................
• Repeat these steps for LEAVE, RETURN and SLEEP levels.
• For unused periods set the time to -- : -- and the time clock will ignore the setting.
• If set to 5/2-day mode you’ll now see Sat Sun displayed on screen. Repeat steps
above for the weekend settings.
• Press A to conrm settings and return to main display ................................................
Model: Slimline-E V3
32