Enter the first comfort level time. (eg - 07.00)
Press H to accept this time setting.
Then enter the desired temperature. (eg - 21°)
Press H to accept this temperature setting.
You should now repeat this operation for comfort
levels 2,3,4. program these in the same way. You
will notice that whilst programming the weekend
levels, Sa, Su is highlighted on the display.
8. Setting the Comfort Levels (Except DT)
To begin programming the comfort levels, press
is displayed as well as the number 1 and
Mo, Tu, We, Th, Fr,
You are now able to program the first comfort
level for the weekday. You first program a time,
followed by the desired temperature.
As described earlier, you should think of these
temperatures as “wake, leave, return and sleep”
For any unused levels, set the time and
temperature to --.--
After you have programmed the week day
comfort levels you are prompted to program the
weekend levels.
You should program these in the same way.
9. Setting the Hot Water Timings. (Only PRT/HW)
To begin programming the HW timings, press
twice, TIMER ON is displayed as well as the number
1 and Mo, Tu, We, Th, Fr,
You are now prompted to enter the start time for
HW timing 1 (Weekday) Eg: 08.00
11
12
To Next Page
Loading...
