To Next PageTo Next PageWhy my Hecht Trimmer does not start?
Your Hecht Trimmer might not be starting due to a few reasons. First, check if the mains voltage is on by inspecting the plug socket and electric supply. If everything seems fine, the on/off switch might be defective, requiring repair by an authorized service center.
What to do if my Hecht Trimmer runs with interruptions?
If your Hecht Trimmer runs with interruptions, there could be a couple of potential causes. A damaged power cable might be the culprit, so check the extension cable and replace it if necessary. Alternatively, there might be an internal loose electrical connection, which would require repair by an authorized service center.
What to do if motor runs but the cutting bar does not move on Hecht Trimmer?
If the motor of your Hecht Trimmer is running but the cutting bar isn't moving, it's likely that the bar is blocked by a thick branch or another object. Immediately switch off the device, unplug it from the socket, and carefully remove whatever is blocking the bar.
How to fix low quality of the cut with my Hecht Trimmer?
If you're experiencing a low quality cut with your Hecht Trimmer, the cutting bar is likely blunt. You'll need to sharpen or replace the cutting bar.
General