14 / 28
TRAINING
C All operating personnel must be adequately trained in the use, operation and
setting and especially familiar with prohibited activities.
• Never allow use by children or people unfamiliar with these instructions. Local regulations
may specify an age limit of the operator.
• This product is not intended for use by persons with reduced sensory or mental capacity or lack
of experience and knowledge - unless they are under the supervision of the person responsible
for their safety or if this person has instructed how use this product. The product is not
intended for use by children and persons with reduced mobility or poor physical disposition.
We strongly recommend to pregnant women to contact her doctor before use of this product.
• Respect national/local regulations regarding working time (please, contact your local authority).
SAFETY INSTRUCTIONS
• Know your tool. Read owner’s manual carefully. Learn its applications and
limitations as well as the specific potential hazards related to this tool. Familiarise
yourself with the controls on the machine and how to use them.
• Be careful at work, be concentrated on actual work, and use the common sense.
• An inattention during work may result in loss of control over the machine.
WARNING!B
Failure to follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
HECHT_675_manual_2019_ EN.indd 14 11.03.2019 8:03:23
To Next Page
Loading...