16 / 31
• This product is designed in accordance with all applicable safety requirements and standards
applicable to it. All repairs should be only made by qualified person and spare parts replaced
by original parts, otherwise the user may be in serious danger.
• An inattention during work may result in loss of control over the machine.
• Do not use this machine if you tired, ill or under the influence of alcohol, drugs or medication.
• Do not put hands and feet near rotating parts.
• Do not put metal or stone into the machine.
• Do not overreach. Keep proper footing and balance at all times. This enables better control
of the tool in unexpected situations.
• Remove any adjusting key or wrench before turning the machine on. A wrench or a key that
is left attached to a rotating part of the machine may result in personal injury.
• Dress properly. Do not wear loose clothing or clothing that has cords or belts, jewellery,
and the like. Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
•
APPLICATION OF MOTOR HOE - CULTIVATOR
WARNING! B
This machine can cause serious injury (for example, cutting off the limbs) and throw
objects away. Failure to observe safety regulations can result in serious injury.
• The machine may only be operated by one person.
• Always ensure good stability on slopes.
• Move the machine at walking pace.
• The following applies for the machines on wheels: while working, proceed following
the contour lines, never uphill or downhill.
• Be especially careful when turning the machine or pulling it towards yourself.
• Increased attention should be paid to places where the soil is rocky and hard. Under these
conditions there is a risk of injury or damage to the machine by throwing stones, clods and
the like.
• The machine must not be lifted or transported while the engine is running. When changing
the working area, switch off the machine and wait for the work tool to stop completely.
• Never use the machine with damaged protection devices or covers or missing, modified or
disconnected safety systems.
• Do not work with a damaged, incomplete or rebuilt machine.
• If you hit a foreign object, stop the machine. Allow the engine to cool down, disconnect
the power and check for any damage to the machine. The machine must be repaired before
starting and using it again.
• If abnormal vibrations occur or you hear unusual sound during operation, stop the machine
and determine the cause. Vibrations generally indicate a malfunction. Have it repaired
before using it again.
• If you use the machine for the first time or after a repair, it is necessary to perform a test
run to see if any abnormal reactions occur. This avoids the risk of injury or damage to
the machine.
• Never leave this machine unattended at the workplace.
• Turn off the engine every time you leave the machine.
• Do not try to repair it yourself. Any work not mentioned in this manual SHOULD ONLY BE
PERFORMED BY AN AUTHORISED SERVICE CENTRES.
Manual_HECHT_715_745_7445_2024_EN.indd 16Manual_HECHT_715_745_7445_2024_EN.indd 16 08.07.2024 14:51:2808.07.2024 14:51:28
To Next Page
Loading...
