22 / 31
SWITCH ON
1. Connect the plug switch to an extension cable. Attach cable to cable restraint, ensuring that
sufficient cable slack is available.
2. To prevent the machine switching on accidentally, the machine is equipped with a safety
lock-off which must be pressed before the switching handle can be activated. Press the safety
push-button.
3. Standing behind the machine, pull the switch handle and keep it in grasp. The motor starts.
Release the safety button.
4. The tines will begin to rotate and dig themselves into the earth.
5. Release the switch handle to stop the motor and blade quickly if necessary.
WARNING! B
Do not touch the rotating tines.
Start the motor carefully according to instructions and with body parts, especially feet well away from
the blade. Do not tilt the tiller when starting the motor. Keep hands and feet away from the rotating
parts. During operation, always hold the handle and switch handle firmly with both hands.
Note: I
During operation, when the switch handle is released, the motor will stop and thus
stopping the tiller from operating.
SWITCH OFF
WARNING! B
The tines will continue to turn for a few seconds after you switch the tool off. Wait
until they have stopped moving - injury hazard!
1. Release the switch handle to stop the motor and blade.
2. Disconnect the power cord, to prevent accidental starting while equipment is unattended.
C Start tilling as close as possible to the power socket.
TILLING
Tilling is digging in, turning over and breaking up garden soil and prepare a seedbed for planting.
A tiller will also clear the soil of unwanted vegetation. The decomposition of this vegetation
matter enriches the soil.
C If the soil is too stiff, it must be prearranged before cultivation (moistened or loosen)
to avoid damage of the plough shares or other parts of tiller.
Also, tilling soil that is too wet will produce unsatisfactory clods. Wait a day or two after heavy.
Rrain for the soil to dry.
C Do not use the machine in a case of heavy, wet clay soil. It can cause permanent
damage to the machine.
Manual_HECHT_715_745_7445_2024_EN.indd 22Manual_HECHT_715_745_7445_2024_EN.indd 22 08.07.2024 14:51:2808.07.2024 14:51:28
To Next Page
Loading...
