Hectronic Citea - Set up Housing

Installation & Commissioning
34
Hectronic GmbH | Allmendstrasse 15 | D-79848 Bonndorf | Tel. +49 7703 9388-0 | Fax +49 7703 9388-60 | mail@hectronic.com
Managing Directors: Stefan Forster, Eckhard Fechtig, Frank Gampp | District Court Freiburg, HRB 621170 | VAT ID No.: DE170986709
3.2.2. Set Up Housing
Falls nötig,
Muttern zum
Nivellieren
verwenden
1. Place the spacer bushing or nuts and the protective base on the screws set in concrete.
The protective base must lie horizontally!
Check with spirit level and, if necessary, align exactly with washers or nuts.
2. Place the Citea on the protective base. Screw the Citea tight (use a torque spanner).
If
necessary,
use nuts for
levelling.