Instruction manual ICON 5
1.4 Equipment Items
1 Shearing Handpiece (machine)
1 Special Screwdriver
1 Operating Instructions
Options:
Various shearing combs and cutters
Special comb cleaning brush
Special lubricating oil
Post Guide
2 Safety Regulations
2.1 Introduction
This Section describes the mandatory safety regulations which must be observed when using
the machine.
All persons undertaking work on or with the machine have an obligation to read the opera-
tion instructions.
The operating instructions must be kept safely and accessible at all times.
2.2 Symbols and Warning Signs
Various symbols are used in the operating instructions. They refer to potential dangers or point
to technical information, the non-observance of which will lead to personal injury, damage to
objects or inefficient operation.
Danger Symbols
Warning
indicates a potentially dangerous situation. If preventive action is not taken, death or very
serious injury could result.
Caution
indicates a potentially dangerous situation. If preventive action is not taken, the consequences
could be slight or minor injuries.
To Next Page
Loading...