Heiniger ICON - 6 Environmental Protection and Disposal; Introduction; Material Categories; 7 Contact Addresses

Instruction manual ICON 19
• Makingsureatalltimesthatyouhaveacuttingtensiononthecutter,adjustthecentrepost
up or down until the second ledge sits on the front of the machine surface around the oil
hole.
• Lockthecentrepostlocknutandrecheckmakingsurethatbothledgesremainseated.
• WhencorrectlysetitwillbeasperIllustration18.
6 Environmental Protection and Disposal
6.1 Introduction
The owner has a duty to dispose of the shearing blades as well as of the shearing handpiece
properly at the end of its service life. Please observe your relevant national regulations.
6.2 Material Categories
Shearing blades and the whole shearing handpiece consist of high alloy steel and can be
disposed at scrapping facilities.
7 Contact Addresses
Your purchasing point or the company shown on your guarantee certificate are authorised
service centres or refer to the nearest service centre in your area.
Illustr. 17, 18