Heinner HDW-BI4582TA++ - Buzzer Sound Set up; Setting up the Buzzer; To Increase the Buzzer Volume; To Decrease the Buzzer Volume

www.heinner.com
20
Delayed Start
Half load(modes)
Tablet
Extra rinse
PROGRAMS
Quickwash
x
x
x
x
Quick 30’
x
x
x
x
Eco
x
x
x
x
Express 50’
x
x
x
x
Hygiene 60°C
x
x
x
x
Auto delicate 30°-50°C
x
x
x
x
Auto Normal 50°-60°C
x
x
x
x
Auto Intensive 60°-70° C
x
x
x
x
“-“ Function cannot be selected “x” function can be selected.
Buzzer sound set up
Setting up the buzzer
1. Press the power On/Off touch button”.(1) (if it is in OFF position).
2. Press and hold the “Tablet” (7) and “Half load” (6) touch buttons for 3 seconds at the
same time to set the volume level.
3. While pressing the “Tablet” (7) and “Half load ” (6) touch buttons, the display shows a
of count down from 3 to 1.
 The first time the volume is adjusted, at the end of 3 seconds, “S03” is shown on
the display.
 If the volume has been adjusted before, at the end of 5 seconds the previously
selected level is shown on the display (from ‘’S00’’ to ‘’S03’’).
The volume level is increased or decreased using the ’tablet’ and “half load’’.
To increase the buzzer volume
1. Press the “half load ” touch button (6).
2. The display (3) changes from “S00” to “S03.
To decrease the buzzer volume
1. Press the “tablet” touch button (4).
2. The display (3) changes from “S03” to “S00”. “S00” means that all buzzers are off.
3. To exit volume adjustment mode, switch off the machine.
The last volume level selected will be stored in memory.
Note: From level sound ‘’3’’ to ‘’1’’, loudness level is reduced by stages depending on level
sound.