Heinner HDW-BI4582TA++ - VIII. TROUBLESHOOTING; FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE

www.heinner.com
23
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR
CODE
ERROR DESCRIPTION
CONTROL
F5
Inadequate water supply
 Make sure the water input tap is totally open and that
there is no water cut.
 Close the water input tap, separate the water input hose
from the tap and clean the filter at the connection end
of the hose.
 Restart your machine, contact the service if the error
resumes.
F3
Error of continuous water input
 Close the tap.
 Contact the service.
F2
The waste water in the machine cannot
be discharged.
 Water discharge hose is clogged.
 The filters of your machine might be clogged.
 Power off-on your machine and activate the program
cancellation command.
 If the error continues, contact the service.
F8
Heater error
Contact the service.
F1
Alarm is active against water overflow
 Power off your machine and close the tap.
 Contact the service.
FE
Faulty electronic card
Contact the service.
F7
Overheating error (temperature in the
machine is too high)
Contact the service.
F9
Divisor position error
Contact the service.
F6
Faulty heater sensor
Contact the service.
VIII. TROUBLESHOOTING