Assembly | 19
7.1 Screw/dowel
assembly with
1screw
f Hold the base against the ceiling
and mark the hole for the desired
assembly position.
f Drill a hole.
f Insert the dowel into the bore
hole.
f Remove the protective foil from
the fastening pad.
f Insert the screw through the
round hole in the base and screw
it halfway in.
f Align the base, press it against
the ceiling and rmly tighten the
screw.
7.2 Screw/dowel
assembly with
2screws
f Hold the base against the ceiling
and mark the holes for the
desired assembly position.
f Drill 2 holes.
f Insert the dowels into the bore
holes.
f Insert the screws through the
elongated holes, hold the base
against the ceiling and rmly
tighten the screws.
To Next Page
Loading...
