22 | Seal (accessories)
9. Seal (accessories)
The smoke alarm can be secured
against removal by unauthorised
persons or sabotage by means of a
seal.
Inserting the seal
f Remove the break-out partition in
the base using pliers.
f Mount the base
(see chapter “Assembly”).
f Rotate the smoke alarm into the
base.
f Insert the seal into the opening.
Ö The opening is closed
completely.
Removing the seal
f Rotate the seal by 90° using a
screwdriver.
Ö The head of the seal is
sheared off.
f Remove the smoke alarm form
the base.
Point for breaking out
To Next Page
Loading...
