8 | Safety
3. Safety
If the safety and operating
instructions are not observed,
noliability and warranty claims
against Hekatron Vertriebs GmbH
shall be enforceable.
General
To ensure the proper and safe
use of the smoke alarm, read the
operating manual completely and
follow the instructions.
Keep the operating manual for
future reference.
Install a sufcient number
of smoke alarms in the
correct assembly positions
(seechapters“Project planning”
and “Assemblyposition”).
Do not paint over the smoke
alarm.
Do not cover or put tape over the
smoke inlets.
The batteries are rmly installed
and may not be replaced.
Do not expose the smoke alarm to
excessive heat, e.g. sunshine, re,
or similar.
Do not open or modify the smoke
alarm.
Hekatron recommends conducting
the project planning, assembly
and maintenance according to the
national directives and regulations.