41
off .
(4) Reverse signal: When you need to reverse the forklift truck, pull the shiftlever
backward and the transmission is in reverse shift. Then the reverse lamps (white) in
the rear combination lamps are on and the buzzer sounds.
(5) Charging Signal: Before you start the engine, put the key switch to the first “on”
position and the charging lamp is on. After engine starting, the charging lamp is
automatically off. If the charging lamp becomes on while the engine is working, it
means something is wrong with the charging circuit and you must stop working and
check the charging circuit as soon as possible.
(6) Oil Pressure Signal: Before you start the engine, put the key switch to the first
“on”position and the oil pressure alarm lamp is on. After engine starting, the oil
pressure alarm lamp is automatically off . If this lamp becomes on while the engine is
working, it indicates low lubricating oil pressure and you must stop working and
check the lubricating system as soon as possible.
(7) Alarm lamp of Braking oil pressure low: Before you start the engine, put the key
switch to the first“on”position and the alarm lamp of Braking oil pressure is on, the
alarm lamp is automatically off, if the lamp becomes on while the engine is working,
it indicates brake oil pressure low and you must stop working, otherwise it will be
danger.
(8) Fuel meter: It indicates how much fuel is left in tank.
(9) Water Temperature Meter: It indicates the temperature of the engine coolant.
(10) Hour Meter: It indicates how many hours the engine has worked .
(11) Voltage Meter: It indicates the voltage of system.
(12) Speed Meter: It indicates how many speed the engine.
(13) Brake Pressure Meter: It indicates the pressure of system.
(14) Oil Pressure of the tor-con: It indicates the pressure of the tor-con.
(15) Oil Temperature Meter of the tor-con: It indicates the temperature of the tor-con.
To Next Page
Loading...
