JS07N·JS07·JS08·JS12·JS14
39
Maintenance
Instructions
Use the operator’s manual on your machine.
The Pre-delivery Preparation consists of com-
pleting the Pre-operation Inspection, the
Maintenance items and the Function Tests.
Use this form to record the results. Place a
check in the appropriate box after each part is
completed. Follow the instructions in the oper-
ator’s manual.
If any inspection receives an N, remove the
machine from service, repair and re-inspect it.
After repair, place a check in the R box.
Legend
Y = Yes, acceptable
N = No, remove from service
R = Repaired
Comments
Pre-delivery Preparation com-
pleted
Y
N
R
Operation inspection completed
Maintenance items completed
Function tests completed
Model
Serial number
Date
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Maintenance Inspection Report
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
• Make copies of this report to use for each in-
spection.
• Select the appropriate checklist(s) for the
type of inspection(s) to perform.
Daily or every 8 hours A
Quarterly or every 250
hours
A+B
Semi-annually or every
500 hours
A+B+C
Annually or Every 1000
hours
A+B+C+D
Two-year or every 2000
hours
A+B+C+D+E
•Place a check in the appropriate box after
each inspection procedure is completed.
•Use the step-by-step procedures in this sec-
tion to learn how to perform these inspections.
•If any inspection receives an "N," tag and re-
move the machine from service, repair and re-
inspect it. After repair, place a check in the
"R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R – repaired
To Next Page
Loading...