35
3
Remove the gas. Flatten the airbag
vest with your hands.
4
Install a new Helite cartridge of the same reference. Insert the cartridge cable
into the cylinder. Be careful not to twist or bend it while screwing it in, as this
could damage it. Screw the cartridge as far as possible. Be careful not to screw
it in crooked. Put the elastic band back on the cartridge. Connect the cartridge
to the CDU electronic card
(locking connector), caution plug in the
connector in the right way .
MAX
5
Put the elements back in place and
close the pocket.
To Next Page
Loading...
