HELIX P ONE MK2

21
en
Stereo application with two P ONE MK2 ampliers and use of a digital signal
Conguration notes for the individual P ONE MK2 ampliers:
Amplier
Amplier
input
Input mode
switch
SPDIF Direct In
switch
Internal
subsonic lter
P ONE MK2 (Left)
Optical Input A/B Mono A On O󰀨
P ONE MK2
(Right)
Optical Input A/B Mono B On O󰀨
IMPORTANT: The crossover frequencies for the high- and lowpass must be set in the preconnected
DSP / DSP amplier. We recommend a subsonic (highpass) lter with a cut-o󰀨 frequency of min. 20 Hz
and a slope of min. 36 dB per octave (Butterworth characteristic).
Speaker R
Digital
stereo signal
Optical
audio
splitter
P ONE MK2 (Left)
P ONE MK2 (Right)
Speaker L
DSP
or
DSP amplier