HelloBaby HB6081 - Temperature Setting; Language Setting; Night Light Setting

6
3. Press the◀/▶/▲/▼ key to select the feeding alarm time you need.
4. Press the to confirm. The Feeding Time icon shows on the LCD screen.
The minimum setting is 0.5 hours, and the maximum setting is 7 hours (9 levels).Note 1：
Note 2： The Feeding alarm default setting is OFF.
Select icon and press to cancel feeding alarm setting. Note 3：
8.5 TEMPERATURE SET TING
1. Press the MENU key and the menu will pop up.
2. Press the◀/▶/▲/▼ key until the thermometer icon is selected.
3. Press the▲/▼ key to select the Degrees Centigrade (℃) or Degrees Fahrenheit (°F).
4. Press the ▲/▼ key to select or for turning on/off alarm function.
5. Press ▲/▼ keys to adjust the Hi limit when(red)is selected.
6. Press ▲/▼ keys to adjust the Lo limit when(blue)is selected.
7. The corresponding temperature shows on the LCD screen.
8.Press keytoExit.
The detected temperature range is 0~50 ℃.Note:
The high temperature alarm default setting is 36 ℃,andthelowtemperature alarmNote:
defaultsettingis8℃.Whenthetemperaturegoesaboveorbelowthesettings,the
temperatureicon willdisplayonthescreen.Itwillalertuserbybeeps.Pressanykeyon
theparentunittostopbeepingandflashing.
8.6 LANGUAGE SETTING
1. Press the MENU key and the menu will pop up.
2. Press the◀/▶/▲/▼ keys until the language iconisselected.
3. Press key to enter into sub-menu, then press ◀/▶/▲/▼ key to select the
language you need.
4. Presskeytoconfirm.
5.Press keytoExit.
8.7 NIGHT LIGHT SETTING
1. Press the MENU key and the menu will pop up.
2. Press the◀/▶/▲/▼ keys until the language iconisselected.
3. Presskey to or the night light.
4.Press keytoExit.
: Press the night light key can also turn on or turn off the night light(Key on the side Note
of Baby Unit).
8.8 SETTINGS
8.8.1 DEFAULT SETTINGS
1.Press MENU Key, the Main Menu will pop up.
2. Press the◀/▶/▲/▼ keyuntiltheSettings icon is selected.
3. Press the MENU Key . The sub-menu Settings will pop up.
4. Press◀/▶/▲/▼ toselectdefault settings , press the MANU key to enter.
5. Select icon to restore default setting; Select icon to cancel the default setting.
 6. Press the Return Key one time to exit sub-menu , and two times exit main menu.
YE S NO
°F
°C