8
10. TROUBLE SHOOTING
9. TECHNICAL DATA
Operation
Environment
Battery (Parent Unit)
Operating time
Li-ion 3.7V 4000mAh (14.8Wh)
Up to 10 hours
RelativeHumidity:15%-85%
Maximum Power
<19dBm
Operation Temperature: +32F~+104F (0℃~40℃)
Battery Charging Temperature: +50F~+104F(10℃~40℃)
2412MHz-2462MHz
Frequency
Power Adapter
Parent Unit: Input: 100-240VAC 50/60Hz
Output: 5V DC 1.2A
Camera Unit: Input: 100-240VAC 50/60Hz
Output: 5V DC 1.2A
Up to 1000ft (300m) outdoor (line of sight)
Up to 165ft (50m) indoor
Operating Range
Display
5.5" 720P TFT LCD
Audio Feedback
(High Pitched Noise)
Interference or Poor
Reception
* Move the monitor close to the camera.
* The camera or monitor may be placed too close to many metal objects.
* Other electronic devices may be interfering with the signal.
* The battery power may be too low.
* The camera and monitor may be placed too closed.
* The volume on the monitor may be set too high.
Frozen Picture on
Screen
* Repower the baby unit (plug out the adapter, then plug it into the
socket again).
* Press the RESET key at the back of parent unit.
No reception on The
Monitor
* The power adapters may not be properly connected.
* Confirm that the camera and monitor are ON.
* Camera may be far away from the monitor.
* Camera and monitor may not be properly paired; follow PAIRING instructions.
To Next Page
