Helmer PC1200h Service Manual

104 pages

To Next Page

360096-1/P

Platelet Incubator Service Manual

i.Series

and Horizon Series™

Countertop

i.Series

PC100i, PC900i, PC1200i

PC100h, PC900h, PC1200h

Floor

i.Series

PC2200i, PC3200i, PC4200i

PC2200h, PC3200h, PC4200h

Default Chapter3
- Table of Contents3
1 About this Manual6
- Safety Precautions and Symbols6
- Product Labels7
- Control System8
- Temperature Probes8
- Chart Recorder9
I.series ® Models10
2 Installation and Configuration10
- Install Batteries for Backup Power10
- Platelet Agitator and Platelet Incubator Compatibility10
- Install a Platelet Agitator in the Platelet Incubator11
- External Monitoring Devices11
- Configure Drawers (Pc4200I)12
- Drawer Labels12
3 Temperature Monitor Settings13
- Home Screen14
- Main Screen15
- Change Configuration Password16
- Calibrate Temperature Probes16
- Factory Default Settings17
- Alarm Reference17
- Alarm Settings18
- Alarm Tests21
- Agitrak™ System25
- Additional System Settings26
- Event Log30
- System Firmware Upgrade31
- Reset the I.center Monitoring System31
- View Manufacturer and Product Information31
4 Temperature Controller Setpoints32
- Level 1 Parameters and Values33
- Level 2 Parameters and Values34
- Level 3 Parameters and Values34
- Level 4 Parameters and Values35
- Platelet Incubator Setpoint35
- Calibrate the Temperature Controller Display36
5 Maintenance37
- Recharge Refrigerant37
- I.center Batteries38
- Motion Alarm Battery (Pc4200I)38
- Clean the Platelet Incubator39
- Lubricate the Drawer Slides (Pc4200I)39
- Lubricate and Service Internal Parts (Pc4200I)40
6 Troubleshooting41
- General Operation Problems41
- Chamber Temperature Problems43
- Alarm Activation Problems43
- Testing Problems45
- Condensation Problems46
7 I.series Parts47
8 Schematics54
- Pc100I, Pc900I, Pc1200I (100/115 V)54
- Pc100I, Pc900I, Pc1200I (230 V)55
- Pc2200I (115 V)56
- Pc2200I (230 V)57
- Pc3200I (115 V)58
- Pc3200I (230 V)59
- Pc4200I (115 V)60
- Pc4200I (230 V)61
9 I.center Screen Reference62
Horizon Series™ Models64
10 Installation And Configuration64
- Install Battery for Backup Power64
- Platelet Agitator and Platelet Incubator Compatibility64
- Install a Platelet Agitator in the Platelet Incubator65
- External Monitoring Devices65
- Configuring Drawers (Pc4200H)66
- Drawer Labels67
11 Alarm Settings68
- Temperature and Power Failure Alarm Volume68
- Motion Alarm (Pc4200H)69
- Alarm Tests70
12 Temperature Controller Setpoints73
- Level 1 Parameters and Values74
- Level 2 Parameters and Values75
- Level 3 Parameters and Values75
- Level 4 Parameters and Values76
- Change the Platelet Incubator Setpoint76
- Calibrate the Temperature Controller Display76
13 Maintenance78
- Recharge Refrigerant78
- Power Failure Alarm Battery79
- Motion Alarm Battery (Pc4200H)79
- Clean the Platelet Incubator80
- Lubricate the Drawer Slides (Pc4200H)80
- Lubricate and Service Internal Parts (Pc4200H)81
15 Horizon Parts87
16 Schematics94
- Pc100H, Pc900H, Pc1200H (100/115 V)94
- Pc100H, Pc900H, Pc1200H (230 V)95
- Pc2200H (115 V)96
- Pc2200H (230 V)97
- Pc3200H (115 V)98
- Pc3200H (230 V)99
- Pc4200H (115 V)100
- Pc4200H (230 V)101
Appendix A: Compliance102
Appendix B: Warranty103

Other manuals for Helmer PC1200h

Operation Manual90 pages

Need help?

Do you have a question about the Helmer PC1200h and is the answer not in the manual?

Helmer PC1200h Specifications

General

Brand	Helmer
Model	PC1200h
Category	Accessories
Language	English

Related product manuals

Helmer PC1200h Service Manual

Table of Contents

Other manuals for Helmer PC1200h

Helmer PC1200h Specifications

Related product manuals