Page 16
6 Handling of received data
The BL-1000 LINK can only receive data via one interface. The interface used is the one
through which data first arrives at the BL-1000 LINK. If the BL-1000 LINK is connected to a
PC via Bluetooth as well as via the USB interface, and the USB interface receives data first,
all data received via the Bluetooth interface is ignored.
The BL-1000 LINK will finish printing text once it has received it before it starts printing other
text it may have received via the other interface.
The BL-1000 LINK starts printing after it has received a complete line. It will stop printing
when it receives more text via handshake.
Cut the printed tape and press the SET button, then data reception continues.
If the BL-1000 LINK does not receive a paragraph or end-of-page character, it waits one
second before starting to print.
To Next Page
Loading...