EasyManua.ls Logo

Hendi 208861 - Automatic Power off; Reset; Information; Language

Hendi 208861
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
EN
AUTOMATIC SWITCHOFF
The machine’s default switch off time is 2 hours,
which means the machine will automatically
switch off after power on 2 hour.
The setting range of automatic switch-off is
from 5 minutes to 4 hours.
After entering the program setting, choose
AUTO-OFF”, press left and right button to adjust
auto off time, then press the setting button, setting
is completed.
RESET
This function will reset all the menu setting and
default beverage parameters to the factory settings
(except the language options). In addition, the in-
formation options will not be reset.
After entering the program setting, choose “RESET”
option and press the left and right button choose
”RESET”, then press setting button to confirm,
the setting is completed.
INFORMATION
In this program you can view verson information,
numbers of produced each drinks and main-
tainance times.
1. Total numbers on produced drinks
2. Numbers of produced cappuccino
3. Numbers of produced espresso
4. Numbers of produced coffee
5. Numbers of produced steam
6. Numbers of produced coffee by coffee powder
7. Numbers of rinsing operations
8. Numbers of decalcifying operations
9. Numbers of rinsing brewing unit operations
10. Numbers of rinsing milk unit
11.
Numbers of installing and replacing the water filter
At the first-time use, there is already a number of
produced beverages because each coffee machine
has been tested before leaving factory.
LANGUAGE
You can set your preferred language on the coffee ma-
chine.
After entering the program setting "CHOOSE LANGUAGE",
then press the left and right button to choose the language,
and press the setting button to confirm, setting is com-
pleted.
EXIT
After entering the program setting, choose “EXIT”. Then
press the setting button to exit. After completing setting,
the machine will return to “READY”.

Table of Contents

Related product manuals