19
EN
RINSE MILK UNIT
•
Please use steam function to clean the inside milk unit before disussem-
bling the milk unit.
•
Take care of burns when using steam function, because hot steam may
spray from steam nozzle.
1. Remove the milk unit carefully
2. Clean every part by water
3. Re-assemble the milk unit and install it to the coffee machine
CLEANING THE COFFEE GROUNDS CONTAINER AND THE DRIP TRAY
•
Do not use chemical solvents and erosive cleaner or alcohol to clean the coffee
grounds container and drip tray.
•
The drip tray and coffee grounds container cannot be cleaned in dishwasher.
•
Do not use metal objects to clean dirt or coffee precipitate to avoid scraping
the drip tray and coffee grounds container.
•
When prompted to clean the coffee grounds, coffee grounds must be
cleaned up, or it will cause the machine damaged.
READY
MENU
MAINTENANCE
RINSE MILKUNIT
READY
REMOVE MILK PIPE
PRESS SETTING
CLEANING
RINSE MILKUNIT
CONFIRM
EMPTY GROUNDS
When the screen shows “READY”, press setting
button to enter into setting.
Select “MENU” by pressing the left and right
button, then press the button to enter it.
Select “MAINTENANCE” by pressing the left and
right button, then press the button to enter it.
Select “RINSE MILKUNIT” by pressing the left
and right button, then press the button to enter it.
Select “CONFIRM” by pressing the left and right
button, then press the button to enter clean process.
Remove the milk pipe from the milk box/container
and insert to the hole of the drip tray grid accord-
ing
to the display on screen. Press setting button.
Milk unit is under cleaning process.
After cleaning process, the machine enters into
“READY” status.
When it cumulates to 15 cups, it will automati-
cally indicate “EMPTY GROUNDS”.
1
RINSE MILK UNIT
•
After a long time use, residual materials may be left in the milk unit and need to be cleaned.
To Next Page
Loading...
