Hendi 208861 - Descaling Process Steps

EN
18
DESCALE
DESCALE
CONFIRM
30 MINS
PRESS SETTING
SOLVENT IN TANK
PRESS SETTING
DECALCIFYING
CLEAN WATER TANK
FILL WATER TANK
READY
PRESS SETTING
DECALCIFYING
Press left and right button to choose “DESCALE”.
Press setting button to confirm.
It will take around 30 minutes. Press setting to start
descaling.
Take a bag of decalcifier and sufficiently dissolves it
in clean water then lead this mixed liquid to the water
tank, and reinstall the water tank to coffee machine.
To start descaling and cleaning for the first time, put
a container, of which the capacity is more than 1L,
under the coffee spout.
After the first stage of descaling and cleaning, take
the water tank out and clean it. Add purified water
again, and reinstall it to the coffee machine.
Press setting button to enter the second stage of
descaling and cleaning.
To clean the residual decalcifierin in pipes. Put
a container, of which the capacity is more than 1L,
under the coffee spout.
When the screen shows “READY”, it indicates the
descaling is completed; Now, you can continue to
make coffee.
2
3
5
1
4