EasyManua.ls Logo

Hendi 208861 - Powering On and Off; Powering On the Coffee Machine; Powering Off the Coffee Machine

Hendi 208861
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
EN
POWER ON
As the machine has been tested at factory, there may be a little coffee powder
left over. We promise the machine is brand new.
The coffee machine will start self-testing and cleaning at the first-time use,
this helps the coffee machine to achieve the best working condition, and this
process cannot be skiped.
Every time powering on the coffee machine, it will automatically complete
heating and cleaning for one time, and the process cannot be stopped. The
coffee machine can only be used after finished the above cycle process.
During the cleaning process, some hot water may flow out of the coffee spout
into the drip tray. Please avoid contacting the spilling hot water.
Please ensure the power is connected before pressing
power button.
POWER OFF
Every time when powering off the coffee machine, it will automatically com-
plete cleaning process for one time, and the process cannot be stopped. This
operation is to clean up the coffee pipelines and remove the coffee grounds.
During the cleaning process, some hot water will flow out of the coffee spout
into the drip tray. Avoid touching spilt hot water, so as not to be burned.
When you press power button, the machine will be power off after
auto cleaning.
Welcome

Table of Contents

Related product manuals