Henley Arklow - Installation Instructions; Hearth Requirements; Ventilation; Chimney Requirements


1. Before installation and/or use of this appliance please read these instructions carefully to ensure that all requirements are fully
understood. The appliance must be itted by a registered installer*, or approved by your local building control oicer.
2. All local regulations, including those referring to national and european standards need to be complied with when installing the


the stove. Please refer to
Building regulations available on http://www.environ.ie and http://www.planningportal.gov.uk.
3. Only use for domestic heating in accordance with these operating instructions.
4. Only approved fuels must be burned. Do not use with liquid fuels or as an incinerator.
-
ent.
6. Do not place photographs, TV’s, paintings, porcelain or other combustible items on the wall or near the appliance. Exposure to
hot temperatures will cause damage. Do not place furniture, or other items such as drying clothing, closer than 1m from the front
of this appliance.
7. Extractor fans or cooker hoods must not be placed in the same room or space as this can cause the appliance to emit fumes into
the room.
8. Do not obstruct inside or outside ventilation required for the safe use of this appliance.
9. Do not make unauthorised changes to the appliance.
10. The chimney must be swept at least once a year
11. Do not connect, or share, the same lue or chimney system with another appliance.

www.henleystoves.com | 5
Hearth
The appliance must stand on a non-combustible constructional hearth
which is at least 125mm thick. The building must have a suitable load-
bearing capacity for the hearth and appliance. Consult a structural
engineer for advice before proceeding. When itting into an existing
hearth check that the hearth complies with current construction regu-

ireplace or chimney it is possible to construct a suitable
non-combustible housing and hearth setting. The lue must be
installed in accordance with all local and national regulations and
current rules in force. Check if adding a new chimney to your prop-
erty requires planning permission. The hearth must protrude at least

constructed on timber, there must be a clearance of at least 250mm
from the timber to the top surface of the hearth.
Ventilation

supply can result in poor combustion and smoke entering the room which is potentially dangerous. This supply of air can come
from either:


-
missioning then there may be insuicient natural ventilation and an additional air supply will be necessary. Many older buildings
are suiciently ventilated by natural leakage of air to provide suitable air supply for an appliance of 5kW output or less.
Extractor fans should not be installed in the same room as the appliance and any air vents should be positioned so that they are
not liable to blockage.
Chimney

than

customer should be made aware of this. Failure to correct an over-drawing lue will invalidate the warranty, and may damage the
appliance.
Please remember that chimney draught is dependent on four main factors.


appliance before installation. Products of combustion entering the room can cause serious health risks.
The following must be checked:




installed and in good condition.