Mobile Rope Measurement MSM 12
Henning GmbH Page 10 2.0 / 3.2009
The voltage display shows the instantaneous voltage of the battery or the accumu-
lator.
7.4 Menu
Figure 2 shows the menu structure of the mobile rope load meter MSM12.
Figure 2: Menu structure
By pressing the CONFIG button you will reach the configuration menu. The rope load
wizard is called by pressing the ADJUST button and in order to switch to the storage
menu press the SAVE button.
Main display
Save
Configuration
Select language
Select sensor type
Set suspension ratio
Set date / time
Delete storage
Set tolerance
To Next Page
Loading...