HENNING MSM 12 - Scope of Delivery Contents; MSM12 Power Supply Requirements

Mobile Rope Measurement MSM 12
 Henning GmbH Page 4 2.0 / 3.2009
List of figures
Figure 1: Main display ................................................................................................ 9
Figure 2: Menu structure .......................................................................................... 10
Figure 3: Saving of the rope loads ............................................................................ 11
Figure 4: Assignment of the measurement ID .......................................................... 11
Figure 5: Configuration menu ................................................................................... 12
Figure 6: Selection of the language .......................................................................... 12
Figure 7: Selection of the sensor type ...................................................................... 13
Figure 8: Suspension ratio setting ........................................................................... 14
Figure 9: Set date /time ............................................................................................ 14
Figure 10: Delete storage ......................................................................................... 15
Figure 11: Set tolerance ........................................................................................... 15
Figure 12: Display unit setting .................................................................................. 16
Figure 13: Rope load wizard ..................................................................................... 16
Figure 14: Storage of the rope load setting ............................................................... 17
1 Scope of delivery
1 x Mobile rope load meter MSM12
1 x External aerial (optional)
(Part no.: 45 000 404)
1 x Bluetooth USB adapter class 1 (optional)
(including driver and documentation CD)
(Part no.: 45 000 403)
1 x USB-A-B cable 1.8 m
(Part no.: 450 000 531)
4 x Mobile rope sensor LSM
2 Power supply
For the operation of the mobile rope load meter MSM12 you also require
4 alkali-manganese round cells type LR6, AA.
These are not included in the scope of delivery. Instead of the LR6 round cells you
can also insert NiMH rechargeable batteries with a capacity of minimum 2,000 mAh.