Henny Penny CombiMaster CM User Manual

Any faults developed by your unit will be shown
on the display:
Faults displayed that do not prevent continued
operation can be bypassed by pressing the Timer
key.
E 11
Fault warnings
- 32 -
Fault Cause Remedial action
warning
E1 Appliance defective
E2 Heating switched off for more than Check energy optimization system!
2 minutes by an external energy
optimizing system.
E3 Appliance defective Notify Customer Service!
E4 Appliance defective Notify Customer Service!
E5 Core temperature probe defective Appliance can be operated without
temperature probe.
Notify Customer Service!
E6 Appliance defective Notify Customer Service!
E7 Appliance defective Notify Customer Service!
E8 Appliance defective Notify Customer Service!
E9 Appliance defective Notify Customer Service!
E10 Appliance defective Notify Customer Service!
E11 No control mode displayed after Notify Customer Service!
switching on
E13 Appliance defective Notify Customer Service!
E14 Appliance defective Notify Customer Service!
E15 Appliance defective Notify Customer Service!
E16 Appliance defective Notify Customer Service!
E17 Ambient temperature too low Room temperature must exceed 41°F (5°C)!
E18 Appliance defective Notify Customer Service!
E19 Appliance defective Notify Customer Service!
E20 Appliance defective Notify Customer Service!
E21 Appliance defective Notify Customer Service!
E22
Appliance defective
Notify Customer Service!

Henny Penny CombiMaster CM Specifications

General

Brand	Henny Penny
Model	CombiMaster CM
Category	Oven
Language	English