What does error 'E-4' mean on Henny Penny EEG-242 Fryer?
If the Henny Penny Fryer displays “E-4”, turn the switch to the OFF position, then turn it back to ON. If the display shows “E-4” again, it indicates that the control board is overheating. Check the louvers on each side of the unit for any obstructions.
What does error 'E-21' mean on Henny Penny EEG-242 Fryer?
If the Henny Penny Fryer displays “E-21”, a certified service technician should check the fryer for correct voltage, inspect the heat circuit, and check for loose or burnt wires, as this indicates slow heat recovery.
What does 'E-18' error mean on a Henny Penny EEG-242?
If the Henny Penny Fryer displays “E-18-A”, “E-18-B”, or “E-18-C”, turn the switch to the OFF position and then back to ON. If the display still indicates a failed sensor, have the connectors checked at the control board and have the sensor checked and replaced if necessary.
What does error 'E-54-C' mean on Henny Penny Fryer?
If the Henny Penny Fryer displays “E-54-C”, turn the switch off and then back on. If “E-54C” persists, have the control PC board replaced.
Why Henny Penny EEG-242 shows 'E-22' no heat error?
If the Henny Penny Fryer displays “E-22” and indicates “NO HEAT” or “CHECK GAS VALVE”, have the gas valve and heat circuit checked.
What does error E-6B mean on Henny Penny EEG-242 Fryer?
If the Henny Penny Fryer displays “E-6B”, turn the switch to the OFF position and then back to ON. If the display continues to show “E-6B”, the temperature probe should be checked.
What does error E-6A mean on Henny Penny EEG-242 Fryer?
If the Henny Penny Fryer displays “E-6A”, turn the switch to the OFF position and then back to ON. If the display continues to show “E-6A”, the temperature probe should be checked.
What does 'E-5' mean on a Henny Penny Fryer?
If the Henny Penny Fryer displays “E-5”, turn the switch to the OFF position and then back to ON. If the display continues to show “E-5”, the heating circuits and temperature probe should be checked.
How to fix E-10 error on Henny Penny Fryer?
If your Henny Penny Fryer displays “E-10”, allow the unit to cool down for 15-20 minutes. Then, push up on the metal reset button located under the right side of the controls. If the high limit does not reset, the high limit must be replaced.
What does error 'E-41' mean on Henny Penny EEG-242?
If the Henny Penny Fryer displays “E-41” or “E-46”, press the power button to turn the vat off and back on again. If the error codes persist, have the controls re-initialized. If the error code continues, the control board should be replaced.
General| Brand | Henny Penny |
|---|---|
| Model | EEG-242 |
| Category | Fryer |
| Language | English |
Provides troubleshooting information in an easy-to-read table format.
Explains safety symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings for hazard communication.
Details the process for isolating malfunctions: define problem, locate in table, review causes, and perform corrections.
Lists error codes, their causes (e.g., oil overheating, drain switch failure), and corrective actions.
Explains how to view actual oil temperature, set-point temperature, and recovery information for each vat.
Details how to check cook cycles remaining before filtering, time/date of last filter, and filter pad hours.
Describes accessing various logs and data like E-LOG, LAST LOAD, DAILY STATS, OIL STATS for operational and technical help.
Guides on how to program product names, assign buttons, change times, temperatures, and cook IDs.
Accesses detailed programming options like language, audio settings, melt cycle, idle mode, and filter tracking.
Instructions for setting the date, time, AM/PM, and time format (12/24 hour).
Lists self-diagnostic functions for technicians, including software, fryer type, push button tests, and probe calibration.
Allows technicians to view advanced operational information such as fryer running hours and oil temperatures.
Sets time periods when the "FILTER NOW?" message will not appear, for peak operation times.
Introduces maintenance procedures and provides tips for using a multimeter for checks.
Outlines regular maintenance tasks like filtering oil, changing filter pads, lubricating o-rings, and cleaning.
Instructions for replacing the control panel and menu card, including safety precautions.
Details the procedure for replacing the high temperature limit control, including disconnecting power and removing nuts.
Instructions for replacing the main power switch, including wire disconnection and reconnection.
Explains how to replace temperature and oil level probes, including Ohm checks and procedure.
Guides on checking solenoid valve resistance and replacing them, including removing panels and fittings.
Instructions for replacing the JIB pump, including removing shrouds, blower, flex lines, and pump feet.
Details replacing the blower, including removing back shroud, screws, zip ties, and wire nuts.
Steps to replace the filter beacon light, including removing side panels, pulling apart the light, and reconnecting wires.
Instructions for replacing air pressure switches, including removing shrouds, covers, hoses, and wires.
Guides on replacing the pilot, including removing burner tubes, flame sensor, screws, and pilot tube.
Introduces the section listing replaceable parts for the Evolution Elite® fryer.
Emphasizes using only genuine Henny Penny parts to avoid damage or injury.
Details the information needed when ordering parts, including item number, part number, and product/serial numbers.
Explains how to obtain pricing and delivery information for parts from distributors.
Outlines warranty coverage for replacement parts (90 days) and procedures for shipping damage claims.
To Next Page