Hercules DJControl Inpulse 300 MK2 - Installation and Setup; Connections

29
4. Installation
Connections
1. Connect the DJControl Inpulse 300 MK2 controller
to your computer with the USB cable.
2. Connect the inputs on your active speakers to the
speaker outputs on DJControl Inpulse 300 MK2 (2
RCA).
3. Connect your headphones to the 1/8” / 3.5 mm
stereo mini-jack connector at the front of DJControl
Inpulse 300 MK2.