Hercules DJControl Inpulse 300 MK2 - Stems Mode

42
Stems mode
In Serato DJ Lite, Stems mode lets you separate a track
into four different parts (vocals and instruments), called
“stems”.
1. To access Stems mode, press SLICER. The
SLICER button’s light stays lit up.
2. Pads 1 to 4 are each associated with a stem. To
stop playing a stem, press the corresponding pad.
The pad’s light turns off.
3. To resume playing the stem, press the
corresponding pad. The pad lights up.
Stems:
Deck 1 / Deck 2
Stem
Pad 1
Vocals
Pad 2
Melody
Pad 3
Bass
Pad 4
Drums
Stems mode is only available with Serato DJ Lite.