Hercules DJControl Inpulse 300 MK2 User Manual

39
Loop mode
A loop is a part of the track that is played repeatedly.
1. To access Loop mode, press LOOP. The LOOP
button’s light stays lit up.
In DJUCED

:
2. To apply a loop, press and hold a pad.
3. To disable a loop, release the corresponding pad.
In Serato DJ Lite:
2. To apply a loop, press a pad.
3. To disable a loop, press the corresponding pad.

Hercules DJControl Inpulse 300 MK2 Specifications

General

Brand	Hercules
Model	DJControl Inpulse 300 MK2
Category	DJ Equipment
Language	English